Sun, driving rain and forty-degree swings strip a bad paint job in a couple of summers. We prepare properly, coat properly, and leave a finish that still looks sharp a decade from now — on homes, warehouses and everything between.
Most exterior paint failures in Melbourne aren't paint failures at all — they're preparation failures. Coating straight over chalked render, flaking weatherboard or a damp substrate buys you two good summers and then it lifts.
Renovaco Group works the other way around. Every exterior job starts with an on-site inspection to find what's actually going on: moisture in the walls, rusting fixings, rotted sills, failed caulking, previous coatings that were never sealed. We fix the substrate first, then build the coating system on top of it. That's the difference between a repaint and a respray.
Same preparation standard, different logistics. Pick the one that sounds like your project.
Weatherboard cottages, brick veneer, rendered townhouses, Californian bungalows and period homes under heritage overlay. We work around your household — not through it.
Warehouses, factory units, office facades, shopfronts and strata blocks. Scheduled in stages or after hours so your operation keeps running while we work.
Render doesn't behave like weatherboard, and neither behaves like Colorbond. We match the primer, the coating and the number of coats to what we're actually painting.
Scraped, sanded, spot-primed and re-caulked. Rotted boards replaced before coating.
Chalking removed, cracks cut out and filled, then sealed with a masonry primer.
Efflorescence treated and a breathable system applied so moisture can still escape.
Degreased and etch-primed. Rust cut back and treated so it doesn't bleed through.
The first thing to fail on a Melbourne home and the first thing we check.
Cleaned of cobweb and mould, then coated in a washable low-sheen finish.
Hand cut-in with a hard-wearing enamel or satin for the pieces that get touched.
Prepped and coated in a finish that tolerates constant movement and sun.
Stained, oiled or painted depending on the timber and how exposed it is.
Posts, beams and lining boards brought back and sealed against the weather.
You'll know what's happening on your property every day it's happening — and what it costs before we start.
We walk the property, test the existing coating, check for moisture and damage, then send a written, itemised quote within 24 hours. Free, no obligation.
Drop sheets down, windows and hardware masked, garden beds and paving covered. Ladders, scaffold or an EWP set up depending on the elevation.
Years of dirt, chalking, mould and — near the bay — salt residue washed off. Surfaces left to dry fully before anything else happens.
Loose paint scraped, edges feathered, cracks cut and filled, rotted timber replaced, rust treated, gaps re-caulked. The stage that decides how long the job lasts.
Substrate-specific primers — masonry sealer on render, oil-based on bare timber, etch primer on metal. Bare patches never go straight to topcoat.
Two full coats at the manufacturer's spread rate, then we walk the property with you. Anything you're not happy with gets fixed before we pack up.
A two-storey office and warehouse frontage taken from tired and patchy to a clean charcoal scheme. Cement sheet panels, metal cladding, window surrounds, downpipes and the full return wall — prepped, primed and finished in a weather-resistant system while the tenancy stayed open for business.
We use premium, low-VOC, weather-resistant exterior systems from trusted brands. The sheen you pick changes how the wall reads and how easily it cleans.
Flattens imperfections on older render and brick. Least reflective, most forgiving on uneven walls.
The workhorse for Melbourne exteriors. Subtle lift, washable, hides surface variation well.
A soft sheen for weatherboard, doors and trim. Wipes clean and holds colour under UV.
Hardest wearing. Front doors, window frames, handrails and anything handled daily.
Top-grade paints and advanced techniques to deliver smooth, durable, flawless finishes that hold up outdoors.
A clear schedule and efficient workflow so your project finishes exactly when promised — without delays.
We cover every surface, protect your landscaping, and maintain a tidy site from start to finish.
Honest, upfront quotes with no hidden fees — so you always know exactly what you're paying for and why.
We're based in Hoppers Crossing and work right across metropolitan Melbourne — from the western suburbs and the bay through to the inner east. If you're not sure whether you're in range, call us on 0418 266 022 and we'll tell you straight away.
Most Melbourne homes take between 4 and 10 days, depending on size, the condition of the existing surfaces and how difficult the access is. Commercial jobs are quoted with a staged programme. Weather can extend any exterior job — we won't coat a damp surface to hit a date.
Spring through autumn is ideal. We work year-round, but we won't apply coatings in rain, on damp substrates, or when temperatures sit below roughly 10°C — the paint won't cure properly and the finish suffers.
With correct preparation and a premium coating system, you should expect many years of service from an exterior repaint. North- and west-facing walls take the most UV and typically show wear first. Proper prep is the single biggest factor in how long it holds.
Yes. Cracked render, rotted timber, rusted metal, failed caulking and loose previous coatings are all addressed before any paint goes on. Anything significant we find during inspection is itemised in your quote, so there are no surprises mid-job.
Yes — on virtually every exterior job. Dirt, chalking, mould and salt residue all stop paint bonding, so washing and full drying is a standard stage, not an add-on.
Premium, low-VOC, long-lasting exterior paints from trusted brands, matched to each substrate — masonry systems on render and brick, flexible acrylics on timber, etch primers and enamels on metal.
Yes. Colour consultation is part of the quoting process. We'll work with your roof colour, window frames, the architecture of the house and the surrounding streetscape — and flag anything that may be restricted if your property sits under a heritage overlay.
We do — warehouses, factory units, office facades, shopfronts and strata blocks. Work can be staged or scheduled after hours so your operation keeps running. Renovaco also offers dedicated commercial painting services.
Renovaco Group is fully licensed and insured, and has been working across Melbourne for over 10 years.
Call 0418 266 022 or send the form below and you'll have a free, no-obligation quote within 24 hours of us seeing the property.
Tell us about the property and we'll come out, assess it properly and send an itemised quote within 24 hours. No obligation, no pressure, no hidden extras.
Submit your details to receive a prompt and professional painting quote.
